Accutase Cell Detachment Solution - 100 ml
€75.00*
Variants:
100 ml
Accutase Cell Detachment Solution with EDTA and Phenol Red – 100 ml
Accutase is a ready-to-use, sterile-filtered cell detachment solution designed as a gentle alternative to trypsin/EDTA for dissociating adherent mammalian cells from standard tissue culture plasticware and adhesion-coated surfaces. It combines proteolytic and collagenolytic enzyme activity in a balanced salt solution to deliver effective yet controlled dissociation, preserving cell-surface proteins and supporting high post-passage viability and rapid reattachment.
The Accutase formulation is based on Dulbecco’s phosphate-buffered saline (DPBS) with EDTA and phenol red as a visual pH indicator. The enzymes are of non-mammalian and non-bacterial origin, making Accutase particularly well suited to stem cell research, vaccine workflows, and any application where animal
- or microbially-derived contaminants must be minimised. The solution auto-inhibits at 37 °C, so no neutralising reagent or serum-containing medium is required after detachment – cells can be transferred directly into fresh medium.
Key Features
Ready-to-use 1x sterile-filtered liquid – no dilution or reconstitution required
Combined proteolytic and collagenolytic enzyme activity for gentle dissociation
Each batch standardised to a defined dissociation activity for lot-to-lot consistency
Non-mammalian and non-bacterial enzyme origin
Auto-inhibits at 37 °C – no neutralising solution needed
Formulated in Dulbecco’s PBS with EDTA
Phenol red included as visual pH indicator
pH 6.8 – 7.8
Typical Applications
Accutase gently dissociates a wide variety of adherent and sensitive cell types, including human embryonic stem cells (hESCs), human induced pluripotent stem cells (iPSCs), neural stem cells, primary neurons, and routinely cultured adherent lines such as HeLa, HEK 293, CHO, MDCK, Vero, NIH/3T3, BHK-21 and A549. Typical use cases include:
Routine subculture and passaging of adherent mammalian cells
Gentle single-cell dissociation of hESCs, iPSCs and other sensitive lines
Sample preparation for flow cytometry and FACS analysis
Analysis of cell-surface markers where epitope integrity matters
Cell migration, proliferation and apoptosis assays
Quiescence assays by serum starvation and oncogene transfection studies
Tumor cell and neural crest cell migration assays
Production scale-up in bioreactor workflows
For routine work, apply approximately 10 ml of Accutase per 75 cm2 of culture surface and incubate for 5–10 minutes at room temperature. The optimal incubation time should be determined for each cell line and should not exceed one hour. Prior to addition, rinse the cell layer with a Ca2+/Mg2+-free salt solution such as DPBS without calcium and magnesium to remove residual serum and divalent cations.
Handling & Storage
Store the unopened bottle frozen at -15 °C or below. Thaw either at room temperature or overnight at +2 °C to +8 °C. Do not thaw Accutase in a 37 °C water bath, as elevated temperatures reduce enzyme activity. After thawing, the solution can be stored for up to 2 months at +2 °C to +8 °C; do not store at room temperature. Do not pre-warm the reagent to 37 °C before application – add it directly to washed cells at room temperature. For long-term shelf life, single-use aliquoting is recommended to avoid repeated thaw cycles. Always work under aseptic conditions.
Quality
Manufactured under strict quality standards. Each batch of Accutase is sterile-filtered and tested for sterility, pH, appearance and dissociation activity to ensure consistent, reproducible performance from lot to lot.
Product Specifications
Specification
Detail
Product typeCell detachment / dissociation reagent
FormatSterile-filtered liquid, ready-to-use
Volume100 ml
Working concentration1x (ready-to-use)
Enzyme activityCombined proteolytic and collagenolytic
Enzyme originNon-mammalian and non-bacterial
Buffer systemDulbecco’s PBS with EDTA
pH indicatorPhenol red
pH range6.8 – 7.8
AppearanceClear, pale red to orange solution
Storage temperature-15 °C or below
Stability after thawingUp to 2 months at +2 °C to +8 °C
Recommended use volume~10 ml per 75 cm2 culture surface
Typical incubation time5 – 10 minutes at room temperature
Shipping conditionsFrozen on dry ice
Intended useFor research use and further manufacturing only
Formulation (Composition per Liter)
Component
Concentration (mg/L)
Inorganic Salts
Sodium chloride (NaCl)8000.00
Disodium hydrogen phosphate (Na2HPO4)1150.00
Potassium chloride (KCl)200.00
Potassium dihydrogen phosphate (KH2PO4)200.00
Other Components
EDTA · 4Na (tetrasodium EDTA)220.00
Phenol red3.00
Proprietary enzyme blend (proteolytic and collagenolytic activity)1x
Accutase is a registered trademark of Innovative Cell Technologies, Inc.
Accutase is a ready-to-use, sterile-filtered cell detachment solution designed as a gentle alternative to trypsin/EDTA for dissociating adherent mammalian cells from standard tissue culture plasticware and adhesion-coated surfaces. It combines proteolytic and collagenolytic enzyme activity in a balanced salt solution to deliver effective yet controlled dissociation, preserving cell-surface proteins and supporting high post-passage viability and rapid reattachment.
The Accutase formulation is based on Dulbecco’s phosphate-buffered saline (DPBS) with EDTA and phenol red as a visual pH indicator. The enzymes are of non-mammalian and non-bacterial origin, making Accutase particularly well suited to stem cell research, vaccine workflows, and any application where animal
- or microbially-derived contaminants must be minimised. The solution auto-inhibits at 37 °C, so no neutralising reagent or serum-containing medium is required after detachment – cells can be transferred directly into fresh medium.
Key Features
Ready-to-use 1x sterile-filtered liquid – no dilution or reconstitution required
Combined proteolytic and collagenolytic enzyme activity for gentle dissociation
Each batch standardised to a defined dissociation activity for lot-to-lot consistency
Non-mammalian and non-bacterial enzyme origin
Auto-inhibits at 37 °C – no neutralising solution needed
Formulated in Dulbecco’s PBS with EDTA
Phenol red included as visual pH indicator
pH 6.8 – 7.8
Typical Applications
Accutase gently dissociates a wide variety of adherent and sensitive cell types, including human embryonic stem cells (hESCs), human induced pluripotent stem cells (iPSCs), neural stem cells, primary neurons, and routinely cultured adherent lines such as HeLa, HEK 293, CHO, MDCK, Vero, NIH/3T3, BHK-21 and A549. Typical use cases include:
Routine subculture and passaging of adherent mammalian cells
Gentle single-cell dissociation of hESCs, iPSCs and other sensitive lines
Sample preparation for flow cytometry and FACS analysis
Analysis of cell-surface markers where epitope integrity matters
Cell migration, proliferation and apoptosis assays
Quiescence assays by serum starvation and oncogene transfection studies
Tumor cell and neural crest cell migration assays
Production scale-up in bioreactor workflows
For routine work, apply approximately 10 ml of Accutase per 75 cm2 of culture surface and incubate for 5–10 minutes at room temperature. The optimal incubation time should be determined for each cell line and should not exceed one hour. Prior to addition, rinse the cell layer with a Ca2+/Mg2+-free salt solution such as DPBS without calcium and magnesium to remove residual serum and divalent cations.
Handling & Storage
Store the unopened bottle frozen at -15 °C or below. Thaw either at room temperature or overnight at +2 °C to +8 °C. Do not thaw Accutase in a 37 °C water bath, as elevated temperatures reduce enzyme activity. After thawing, the solution can be stored for up to 2 months at +2 °C to +8 °C; do not store at room temperature. Do not pre-warm the reagent to 37 °C before application – add it directly to washed cells at room temperature. For long-term shelf life, single-use aliquoting is recommended to avoid repeated thaw cycles. Always work under aseptic conditions.
Quality
Manufactured under strict quality standards. Each batch of Accutase is sterile-filtered and tested for sterility, pH, appearance and dissociation activity to ensure consistent, reproducible performance from lot to lot.
Product Specifications
Specification
Detail
Product typeCell detachment / dissociation reagent
FormatSterile-filtered liquid, ready-to-use
Volume100 ml
Working concentration1x (ready-to-use)
Enzyme activityCombined proteolytic and collagenolytic
Enzyme originNon-mammalian and non-bacterial
Buffer systemDulbecco’s PBS with EDTA
pH indicatorPhenol red
pH range6.8 – 7.8
AppearanceClear, pale red to orange solution
Storage temperature-15 °C or below
Stability after thawingUp to 2 months at +2 °C to +8 °C
Recommended use volume~10 ml per 75 cm2 culture surface
Typical incubation time5 – 10 minutes at room temperature
Shipping conditionsFrozen on dry ice
Intended useFor research use and further manufacturing only
Formulation (Composition per Liter)
Component
Concentration (mg/L)
Inorganic Salts
Sodium chloride (NaCl)8000.00
Disodium hydrogen phosphate (Na2HPO4)1150.00
Potassium chloride (KCl)200.00
Potassium dihydrogen phosphate (KH2PO4)200.00
Other Components
EDTA · 4Na (tetrasodium EDTA)220.00
Phenol red3.00
Proprietary enzyme blend (proteolytic and collagenolytic activity)1x
Accutase is a registered trademark of Innovative Cell Technologies, Inc.