RY(ham) Yoshida Sarcoma Cells

Name: CLS Cell Lines Service GmbH
Address: Dr.-Eckener-Straße 8, Eppelheim, 69214, DE
Telephone: +496221405780
Price range: €€€

1 104,00 CAD$*

Products are shipped frozen on dry ice in cryotubes. Each cryotube typically contains 3 × 10⁶ cells for adherent lines or 5 × 10⁶ cells for suspension lines (refer to the batch CoA for details).

Prix hors taxes, frais de livraison en sus

cryovial

Numéro de produit : 500415

Fiche signalétique

Fiche de produit

Description	This cell line was established as in vitro cell line from a Yoshida Ascites sarcoma induced in Sprague-Dawley rats.
Organisme	Rat
Maladie	Sarcoma
Site métastatique	Ascites

Type de cellule	Fibroblast
Propriétés de croissance	Adherent

Référence	RY(ham) Yoshida Sarcoma (Cytion catalog number 500415)
Niveau de biosécurité	1
NCBI_Numéro d'identification fiscale	10116
Cellosaurus - Numéro d'enregistrement	CVCL_1D05

Milieu de culture	RPMI 1640, w: 2.0 mM stable Glutamine, w: 2.0 g/L NaHCO3 (Cytion article number 820700a)
Suppléments	Supplement the medium with 10% FBS
Réactif de dissociation	Accutase
Repiquage	Gather the suspension cells in a 15 ml tube and gently wash the adherent cells with PBS lacking calcium and magnesium (use 3-5 ml for T25 flasks and 5-10 ml for T75 flasks). Apply Accutase (1-2 ml for T25 flasks, 2.5 ml for T75 flasks) ensuring full coverage of the cell layer. Allow the cells to incubate at room temperature for 10 minutes. Following incubation, combine and centrifuge both the suspension and adherent cells. After centrifugation, carefully resuspend the cell pellet and transfer the cell suspension into new flasks containing fresh medium.
Densité de semis	1 to 2 x 10⁴ cells/cm²
Rétablissement après le dégel	After thawing, the cells should be handled at a cell concentration of 5 x 10⁵ cells/ml and allowed to recover for at least 48 hours.
Milieu de congélation	As a cryopreservation medium, we use complete growth medium (including FBS) + 10% DMSO for adequate post-thaw viability, or CM-1 (Cytion catalog number 800100), which includes optimized osmoprotectants and metabolic stabilizers to enhance recovery and reduce cryo-induced stress.
Décongélation et culture des cellules	Confirm that the vial remains deeply frozen upon delivery, as cells are shipped on dry ice to maintain optimal temperatures during transit. Upon receipt, either store the cryovial immediately at temperatures below -150°C to ensure the preservation of cellular integrity, or proceed to step 3 if immediate culturing is required. For immediate culturing, swiftly thaw the vial by immersing it in a 37°C water bath with clean water and an antimicrobial agent, agitating gently for 40-60 seconds until a small ice clump remains. Perform all subsequent steps under sterile conditions in a flow hood, disinfecting the cryovial with 70% ethanol before opening. Carefully open the disinfected vial and transfer the cell suspension into a 15 ml centrifuge tube containing 8 ml of room-temperature culture medium, mixing gently. Centrifuge the mixture at 300 x g for 3 minutes to separate the cells and carefully discard the supernatant containing residual freezing medium. Gently resuspend the cell pellet in 10 ml of fresh culture medium. For adherent cells, divide the suspension between two T25 culture flasks; for suspension cultures, transfer all the medium into one T25 flask to promote effective cell interaction and growth. Adhere to established subculture protocols for continued growth and maintenance of the cell line, ensuring reliable experimental outcomes.
Atmosphère d'incubation	37°C, 5% CO₂, humidified atmosphere.
Conditions d'expédition	Cryopreserved cell lines are shipped on dry ice in validated, insulated packaging with sufficient refrigerant to maintain approximately −78 °C throughout transit. On receipt, inspect the container immediately and transfer vials without delay to appropriate storage.
Conditions d'entreposage	For long-term preservation, place vials in vapor-phase liquid nitrogen at about −150 to −196 °C. Storage at −80 °C is acceptable only as a short interim step before transfer to liquid nitrogen.

Stérilité	Mycoplasma contamination is excluded using both PCR-based assays and luminescence-based mycoplasma detection methods. To ensure there is no bacterial, fungal, or yeast contamination, cell cultures are subjected to daily visual inspections.

RY(ham) Yoshida Sarcoma Cells

Renseignements généraux

Caractéristiques

Données réglementaires

Données biomoléculaires

Manipulation

Contrôle de la qualité et analyse moléculaire