IMR-90 Cells
Required products
EMEM (MEM Eagle), w: 2 mM L-Glutamine, w: 1.5 g/L NaHCO3, w: EBSS, w: 1 mM Sodium pyruvate, w: NEAA
€25.00*
One of the most widely used synthetic cell culture media is Minimum Essential Medium Eagle (MEM). Developed by Harry Eagle, this medium was first introduced in 1959 and has since become a popular choice for various cell types grown in monolayers and adherent cell lines.
This EMEM medium consists of 2 mM L-Glutamine, 1.5 g/L NaHCO3, EBSS, 1 mM Sodium pyruvate, and NEAA.
What's in EMEM?
EMEM is a modified version of Eagle's minimum essential medium, containing Earle's Balanced Salt Solution, non-essential amino acids, L-glutamine, sodium pyruvate, and sodium bicarbonate. It's important to note that this reduced level of sodium bicarbonate (NaHCO3, 1.5 g/L) is intended for use in 5% CO2 in the air. To maintain its effectiveness, storing the medium at two °C to 8°C in the dark when not in use is recommended.
What is EMEM used for?
Eagle's minimal essential medium (EMEM) is a cell culture medium that can maintain cells in tissue culture. The medium contains higher concentrations of amino acids, allowing for a more accurate approximation of the protein composition of cultured mammalian cells. EMEM may be used to cultivate various cells, including fibroblasts, human liver cancer cell line (HepG2) cells and human fetal brain progenitor-derived astrocyte cells (PDA). It is typically used in the presence of fetal bovine serum (FBS), calf, or horse sera.
How is EMEM different from other cell culture media?
While EMEM and Dulbecco's modified Eagle's medium (DMEM) share some similarities, they also differ. Both media lack protein and contain the amino acids, salts, glucose, and vitamins required to provide a cell with energy and maintain it in tissue culture. However, the DMEM formulation is modified to contain up to four times more vitamins and amino acids and two to four times more glucose than EMEM. It's worth noting that EMEM is also different from the original MEM formulation.
Quality control
pH = 7.2 +/
- 0.02 at 20-25°C.
Each lot has been tested for sterility and absence of mycoplasma and bacteria.
Maintenance
Keep refrigerated at +2°C to +8°C in the dark. Freezing and warming up to +37° C minimize the quality of the product.
Do not heat the medium to more than 37° C or use uncontrollable sources of heat (e.g., microwave appliances).
If only a part of the medium is to be used, remove this amount from the bottle and warm it up at room temperature.
Shelf life for any medium except for the basic medium is 8 weeks from the date of manufacture.
Composition
Components
mg/L
Inorganic Salts
Calcium chloride x 2H2O
264,92
Magnesium sulfate
97,67
Potassium chloride
400,00
Sodium chloride
6,800.00
Sodium dihydrogen phosphate x H2O
140,00
Other Components
D(+)-Glucose
1,000.00
Phenol red
10,00
Sodium pyruvate
110,00
NaHCO3
1,500.00
Amino Acids
L-Alanine
8,90
L-Arginine x HCl
126,00
L-Asparagine x H2O
13,20
L-Aspartic acid
13,30
L-Cystine
24,00
L-Glutamine
292,30
L-Glutamic acid
14,70
Glycine
7,50
L-Histidine x HCl x H2O
42,00
L-Isoleucine
52,00
L-Leucine
52,00
L-Lysine x HCl
72,50
L-Methionine
15,00
L-Phenylalanine
32,00
L-Proline
11,50
L-Serine
10,50
L-Threonine
48,00
L-Tryptophan
10,00
L-Tyrosine
36,00
L-Valine
46,00
Vitamins
D-Calcium pantothenate
1,00
Choline chloride
1,00
Folic acid
1,00
myo-Inositol
2,00
Nicotinamide
1,00
Pyridoxal x HCl
1,00
Riboflavin
0,10
Thiamine x HCl
1,00
This EMEM medium consists of 2 mM L-Glutamine, 1.5 g/L NaHCO3, EBSS, 1 mM Sodium pyruvate, and NEAA.
What's in EMEM?
EMEM is a modified version of Eagle's minimum essential medium, containing Earle's Balanced Salt Solution, non-essential amino acids, L-glutamine, sodium pyruvate, and sodium bicarbonate. It's important to note that this reduced level of sodium bicarbonate (NaHCO3, 1.5 g/L) is intended for use in 5% CO2 in the air. To maintain its effectiveness, storing the medium at two °C to 8°C in the dark when not in use is recommended.
What is EMEM used for?
Eagle's minimal essential medium (EMEM) is a cell culture medium that can maintain cells in tissue culture. The medium contains higher concentrations of amino acids, allowing for a more accurate approximation of the protein composition of cultured mammalian cells. EMEM may be used to cultivate various cells, including fibroblasts, human liver cancer cell line (HepG2) cells and human fetal brain progenitor-derived astrocyte cells (PDA). It is typically used in the presence of fetal bovine serum (FBS), calf, or horse sera.
How is EMEM different from other cell culture media?
While EMEM and Dulbecco's modified Eagle's medium (DMEM) share some similarities, they also differ. Both media lack protein and contain the amino acids, salts, glucose, and vitamins required to provide a cell with energy and maintain it in tissue culture. However, the DMEM formulation is modified to contain up to four times more vitamins and amino acids and two to four times more glucose than EMEM. It's worth noting that EMEM is also different from the original MEM formulation.
Quality control
pH = 7.2 +/
- 0.02 at 20-25°C.
Each lot has been tested for sterility and absence of mycoplasma and bacteria.
Maintenance
Keep refrigerated at +2°C to +8°C in the dark. Freezing and warming up to +37° C minimize the quality of the product.
Do not heat the medium to more than 37° C or use uncontrollable sources of heat (e.g., microwave appliances).
If only a part of the medium is to be used, remove this amount from the bottle and warm it up at room temperature.
Shelf life for any medium except for the basic medium is 8 weeks from the date of manufacture.
Composition
Components
mg/L
Inorganic Salts
Calcium chloride x 2H2O
264,92
Magnesium sulfate
97,67
Potassium chloride
400,00
Sodium chloride
6,800.00
Sodium dihydrogen phosphate x H2O
140,00
Other Components
D(+)-Glucose
1,000.00
Phenol red
10,00
Sodium pyruvate
110,00
NaHCO3
1,500.00
Amino Acids
L-Alanine
8,90
L-Arginine x HCl
126,00
L-Asparagine x H2O
13,20
L-Aspartic acid
13,30
L-Cystine
24,00
L-Glutamine
292,30
L-Glutamic acid
14,70
Glycine
7,50
L-Histidine x HCl x H2O
42,00
L-Isoleucine
52,00
L-Leucine
52,00
L-Lysine x HCl
72,50
L-Methionine
15,00
L-Phenylalanine
32,00
L-Proline
11,50
L-Serine
10,50
L-Threonine
48,00
L-Tryptophan
10,00
L-Tyrosine
36,00
L-Valine
46,00
Vitamins
D-Calcium pantothenate
1,00
Choline chloride
1,00
Folic acid
1,00
myo-Inositol
2,00
Nicotinamide
1,00
Pyridoxal x HCl
1,00
Riboflavin
0,10
Thiamine x HCl
1,00
Accutase
€50.00*
Accutase Cell Dissociation Reagent
- A Gentle Alternative to Trypsin
Accutase is a cell detachment solution that is revolutionizing the cell culture industry. It is a mix of proteolytic and collagenolytic enzymes that mimics the action of trypsin and collagenase. Unlike trypsin, Accutase does not contain any mammalian or bacterial components and is much gentler on cells, making it an ideal solution for the routine detachment of cells from standard tissue culture plasticware and adhesion coated plasticware. In this blog post, we will explore the benefits and uses of Accutase and how it is changing the game in cell culture.
Advantages of Accutase
Accutase has several advantages over traditional trypsin solutions. Firstly, it can be used whenever gentle and efficient detachment of any adherent cell line is needed, making it a direct replacement for trypsin. Secondly, Accutase works extremely well on embryonic and neuronal stem cells, and it has been shown to maintain the viability of these cells after passaging. Thirdly, Accutase preserves most epitopes for subsequent flow cytometry analysis, making it ideal for cell surface marker analysis.
Additionally, Accutase does not need to be neutralized when passaging adherent cells. The addition of more media after the cells are split dilutes Accutase so it is no longer able to detach cells. This eliminates the need for an inactivation step and saves time for cell culture technicians. Finally, Accutase does not need to be aliquoted, and a bottle is stable in the refrigerator for 2 months.
Applications of Accutase
Accutase is a direct replacement for trypsin solution and can be used for the passaging of cell lines. Additionally, Accutase performs well when detaching cells for the analysis of many cell surface markers using flow cytometry and for cell sorting. Other downstream applications of Accutase treatment include analysis of cell surface markers, virus growth assay, cell proliferation, tumor cell migration assays, routine cell passage, production scale-up (bioreactor), and flow cytometry.
Composition of Accutase
Accutase contains no mammalian or bacterial components and is a natural enzyme mixture with proteolytic and collagenolytic enzyme activity. It is formulated at a much lower concentration than trypsin and collagenase, making it less toxic and gentler, but just as effective.
Efficiency of Accutase
Accutase has been shown to be efficient in detaching primary and stem cells and maintaining high cell viability compared to animal origin enzymes such as trypsin. 100% of cells are recovered after 10 minutes, and there is no harm in leaving cells in Accutase for up to 45 minutes, thanks to autodigestion of Accutase.
In summary
In conclusion, Accutase is a powerful solution that is changing the game in cell culture. With its gentle nature, efficiency, and versatility, Accutase is the ideal alternative to trypsin. If you are looking for a reliable and efficient solution for cell detachment, Accutase is the solution for you.
- A Gentle Alternative to Trypsin
Accutase is a cell detachment solution that is revolutionizing the cell culture industry. It is a mix of proteolytic and collagenolytic enzymes that mimics the action of trypsin and collagenase. Unlike trypsin, Accutase does not contain any mammalian or bacterial components and is much gentler on cells, making it an ideal solution for the routine detachment of cells from standard tissue culture plasticware and adhesion coated plasticware. In this blog post, we will explore the benefits and uses of Accutase and how it is changing the game in cell culture.
Advantages of Accutase
Accutase has several advantages over traditional trypsin solutions. Firstly, it can be used whenever gentle and efficient detachment of any adherent cell line is needed, making it a direct replacement for trypsin. Secondly, Accutase works extremely well on embryonic and neuronal stem cells, and it has been shown to maintain the viability of these cells after passaging. Thirdly, Accutase preserves most epitopes for subsequent flow cytometry analysis, making it ideal for cell surface marker analysis.
Additionally, Accutase does not need to be neutralized when passaging adherent cells. The addition of more media after the cells are split dilutes Accutase so it is no longer able to detach cells. This eliminates the need for an inactivation step and saves time for cell culture technicians. Finally, Accutase does not need to be aliquoted, and a bottle is stable in the refrigerator for 2 months.
Applications of Accutase
Accutase is a direct replacement for trypsin solution and can be used for the passaging of cell lines. Additionally, Accutase performs well when detaching cells for the analysis of many cell surface markers using flow cytometry and for cell sorting. Other downstream applications of Accutase treatment include analysis of cell surface markers, virus growth assay, cell proliferation, tumor cell migration assays, routine cell passage, production scale-up (bioreactor), and flow cytometry.
Composition of Accutase
Accutase contains no mammalian or bacterial components and is a natural enzyme mixture with proteolytic and collagenolytic enzyme activity. It is formulated at a much lower concentration than trypsin and collagenase, making it less toxic and gentler, but just as effective.
Efficiency of Accutase
Accutase has been shown to be efficient in detaching primary and stem cells and maintaining high cell viability compared to animal origin enzymes such as trypsin. 100% of cells are recovered after 10 minutes, and there is no harm in leaving cells in Accutase for up to 45 minutes, thanks to autodigestion of Accutase.
In summary
In conclusion, Accutase is a powerful solution that is changing the game in cell culture. With its gentle nature, efficiency, and versatility, Accutase is the ideal alternative to trypsin. If you are looking for a reliable and efficient solution for cell detachment, Accutase is the solution for you.
Freeze Medium CM-1 - 500 ml
€450.00*
Cryopreservation Media Variants:
500 ml
Cytion’s Freeze Medium CM-1 is a state-of-the-art cryopreservation medium designed to ensure the highest level of cell viability and functionality post-thaw. This versatile medium is suitable for a broad spectrum of cell types, including both human and animal cells, making it an essential tool for diverse research applications. Formulated with a meticulously balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-1 minimizes ice crystal formation and cellular stress during the freezing process, thus preserving cellular integrity.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Variants from €59.00*
Freeze Medium CM-1 - 100 ml
€99.00*
Cryopreservation Media Variants:
100 ml
Cytion’s Freeze Medium CM-1 is a state-of-the-art cryopreservation medium designed to ensure the highest level of cell viability and functionality post-thaw. This versatile medium is suitable for a broad spectrum of cell types, including both human and animal cells, making it an essential tool for diverse research applications. Formulated with a meticulously balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-1 minimizes ice crystal formation and cellular stress during the freezing process, thus preserving cellular integrity.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Variants from €59.00*
Freeze Medium CM-1 - 50 ml
€59.00*
Cryopreservation Media Variants:
50 ml
Cytion’s Freeze Medium CM-1 is a state-of-the-art cryopreservation medium designed to ensure the highest level of cell viability and functionality post-thaw. This versatile medium is suitable for a broad spectrum of cell types, including both human and animal cells, making it an essential tool for diverse research applications. Formulated with a meticulously balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-1 minimizes ice crystal formation and cellular stress during the freezing process, thus preserving cellular integrity.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key features of Freeze Medium CM-1 include:
Broad Compatibility: Effective for a wide range of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-1 is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-1 for Freezing Cells
To use CM-1 for freezing both adherent and suspension cells, follow these steps:
For adherent cells, wash and dissociate them from the culture substrate. For suspension cells, proceed directly to the next step.
Count the cells to ensure they are at the proper concentration.
Centrifuge the cells to pellet them, then resuspend in CM-1 freeze medium.
Transfer the resuspended cells into cryovials.
Use a slow-freezing method before transferring the cells to long-term storage.
🥶 Method
🔍 Description
💡 Steps
❄️
Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1️⃣ Place cells in freeze medium in a 4°C freezer for 40 minutes.
2️⃣ Transfer to a -80°C freezer for 24 hours.
3️⃣ Store cells in liquid nitrogen for long-term preservation.
🧊
Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1️⃣ Prepare cells in cryovials with freeze medium.
2️⃣ Place cryovials in Mr. Frosty container.
3️⃣ Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬
Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1️⃣ Program the device to gradually decrease the temperature.
2️⃣ Place prepared cells in the freezer.
3️⃣ After the freezing cycle, transfer cells to liquid nitrogen.
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains FBS, DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-1 offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Freeze medium CM-ACF - serum free - 500 ml
€450.00*
Cryopreservation Media Variants:
500 ml
Cytion’s Freeze Medium CM-ACF is an advanced serum-free cryopreservation medium tailored to ensure exceptional cell viability and functionality post-thaw. This versatile medium is suitable for a wide range of cell types, including both human and animal cells, making it an indispensable tool for diverse research applications. Formulated with a carefully balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-ACF minimizes ice crystal formation and cellular stress during the freezing process, thereby preserving cellular integrity.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Variants from €59.00*
Freeze medium CM-ACF - serum free - 100 ml
€99.00*
Cryopreservation Media Variants:
100 ml
Cytion’s Freeze Medium CM-ACF is an advanced serum-free cryopreservation medium tailored to ensure exceptional cell viability and functionality post-thaw. This versatile medium is suitable for a wide range of cell types, including both human and animal cells, making it an indispensable tool for diverse research applications. Formulated with a carefully balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-ACF minimizes ice crystal formation and cellular stress during the freezing process, thereby preserving cellular integrity.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Variants from €59.00*
Freeze medium CM-ACF - serum free - 50 ml
€59.00*
Cryopreservation Media Variants:
50 ml
Cytion’s Freeze Medium CM-ACF is an advanced serum-free cryopreservation medium tailored to ensure exceptional cell viability and functionality post-thaw. This versatile medium is suitable for a wide range of cell types, including both human and animal cells, making it an indispensable tool for diverse research applications. Formulated with a carefully balanced combination of cryoprotectants and essential nutrients, Freeze Medium CM-ACF minimizes ice crystal formation and cellular stress during the freezing process, thereby preserving cellular integrity.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.
Key Features of Freeze Medium CM-ACF
Serum-Free Formulation: Eliminates the variability and risks associated with serum, providing a defined and controlled environment for a wide array of cell types, including primary cells, stem cells, and established cell lines.
Broad Compatibility: Effective for a wide array of cell types, including primary cells, stem cells, and established cell lines.
High Viability: Optimized to maximize post-thaw cell recovery and viability, ensuring reliable experimental outcomes.
Ready-to-Use: Conveniently prepared and sterilized for immediate application, reducing preparation time and risk of contamination.
Enhanced Stability: Maintains consistent performance under standard cryopreservation conditions, ensuring reproducible results.
Long Shelf Life: CM-ACF is a serum-containing, ready-to-use cryopreservation medium that can be stored in the refrigerator for up to one year.
Using CM-ACF for Freezing Cells
To use CM-ACF for freezing both adherent and suspension cells, follow these steps:
Preparation:
For adherent cells: Wash and dissociate them from the culture substrate.
For suspension cells: Proceed directly to the next step.
Cell Counting: Ensure cells are at the proper concentration.
Centrifugation: Pellet the cells and resuspend them in CM-ACF freeze medium.
Cryovial Transfer: Transfer the resuspended cells into cryovials.
Freezing Process: Use a slow-freezing method before transferring the cells to long-term storage.
Freezing Methods
Method
Description
Steps
❄️ Manual Freezing
A step-by-step method involving gradual temperature reduction to ensure cell viability.
1. Place cells in freeze medium in a 4°C freezer for 40 minutes. 2. Transfer to a -80°C freezer for 24 hours. 3. Store cells in liquid nitrogen for long-term preservation.
🧊 Using Mr. Frosty
A convenient device that allows for controlled freezing rates without electrical power.
1. Prepare cells in cryovials with freeze medium. 2. Place cryovials in Mr. Frosty container. 3. Store at -80°C for 24 hours before transferring to liquid nitrogen.
🧬 Controlled-Rate Freezer
A high-precision freezer by Thermo Fisher or other manufacturers designed for controlled temperature reduction.
1. Program the device to gradually decrease the temperature. 2. Place prepared cells in the freezer. 3. After the freezing cycle, transfer cells to liquid nitrogen.
Long-Term Storage
Store the cryovials at temperatures below -130°C or in liquid nitrogen for long-term preservation.
Ingredients
Contains DMSO, Glucose, Salts
Buffering capacity: pH = 7.2 to 7.6
Cytion’s Freeze Medium CM-ACF offers a reliable solution for cryopreservation, ensuring high cell viability and functionality post-thaw for a wide range of research applications.